|
BCM Diagnostics Pro, a
32-bit native application that
is a comprehensive system analysis utility that helps you
diagnose problems on PCs running Microsoft Windows 95, 98, ME,
NT, 2000 and XP operating
systems (pre Vista). It tests almost every PC component and singles out
faulty areas. It also provides a native DOS diagnostic program
which is capable of analyzing and diagnosing your PC down to the
lowest hardware level.
BCM Diagnostics Pro
provides a tabbed property sheet display that summarizes
the overall
performance of every component on your PC, including your
computer's processor, memory, audio & video cards, modem,
graphics display, hard disk, floppy drive, and CD-ROM drive.
Click on the thumbnail
image to the right for
a full screen shot. |
|
 |
BCM Diagnostics Pro
Modules
- System Information (system
summary, bus, CPU, disk, bios, DMI, PCI, PNP, network, etc.)
- DMI Information (DMI data
browser, DMI 2.0, SMBIOS 2.1+)
- INI Information (config.sys,
autoexec.bat, win.ini, system.ini, protocol.ini)
- CPU Test (CPU ID, speed,
feature, integrity tests)
- Memory Test (memory size, heap
allocation, integrity tests)
- Video Test (AVI info., MPEG
info., functional tests)
- Graphics Test (vesa bios, mode
table, directdraw, integrity and functional tests)
- Hard Disk Test (disk size,
usage, parameters and integrity tests)
- Floppy Disk Test (diskette
size, usage, parameters and integrity tests)
- Modem Test (modem info., AT
command test, connection test)
- CD-ROM Test (IDE drive
parameters, speed, integrity tests)
- System Health Monitor (system
resource usage, voltage, temperature, etc.)
- Stress Test (sequential and
concurrent tests)
- Benchmark Test (CD-ROM, CPU,
memory, disk, graphics)
- DOS Diagnostics (low level
hardware tests under DOS environment)
- Clean Up Utility (remove invalid
program links and unwanted files)
- TCP Tool (tune-up Internet
connection speed, ping, and trace utilities)
- SCSI Tool (device info.,
device inquiry, request sense, media capacity, lock/unlock
device)
- USB Tool (device info.,
connection hierarchy)
- Report Wizard (report and
print test information and results)
Stress Test
The Stress Test
rigorously
evaluates your entire system's stability under Windows. It can
be scripted to run the test modules sequentially, or concurrently,
and can also be set up to stop or continue on any error that
arises.
Passing an overnight Stress Test with no errors
reported would indicate that a PC is in very stable condition. Running
the Stress Test periodically on your PC would ensure
that system components operate properly and help prevent adverse
situations from occurring in the future such as system crashes and/or data
losses.
The Stress Test is also
used extensively by OEMs, system builders, technicians and
end-users to do a burn-in
test on a newly assembled or repaired PC.
Benchmarks
The Benchmarks test is designed to test and evaluate a PC’s performance
under a Windows environment. Five major system components are tested
and compared to a reference system. The Benchmarks test will run all
enabled modules consecutively to evaluate the performance of each
individual component.
Hardware
Diagnostics (MS-DOS)
BCM Diagnostics for DOS is a DOS-based
diagnostics program. It is a component of BCM Diagnostics Pro that helps you diagnose hardware problems
on your PC. It bypasses the Windows operating system layers and performs tests
down to the physical hardware level. The test results reflect your system's stability, reliability and compatibility.
System Health Monitor
The System Health Monitor
can be launched in the
background to periodically check free system resources,
available memory and disk space, and CPU usage. If system
resources dip below a desired threshold, a warning message is
displayed.
Minimum System Requirements
- A 486, or higher, 100% IBM AT
compatible PC
- Windows 95 or later operating
system
- Hard drive with 9 MB free
space
- VGA Color Monitor
- Mouse and Keyboard
So whenever you have doubts about
your system's reliability, or whenever you buy, build or repair a PC, you can
use BCM Diagnostics Pro, both Windows and DOS versions,
to perform a rigorous physical examination on your PC and
understand its stability and capability. Distributed via
download only.
To order securely online:
Click on the "Buy Now" button below.
|
